ASTM A524 Carbon Seamless Steel Pipes

ASTM A524 Carbon Seamless Steel Pipes

ASTM A524 Carbon Steel Seamless Pipes are Low Carbon Steel Pipes with max 0.21 % carbon content with combination of 0.90-1.35 % manganese. These Pipes are also known as mild steel pipes and tubes. ASTM A524 Pipes are low-cost Pipes easy to form and shape. These pipes are manufactured as per ASTM Specification and commercially referred as cs pipes or ms pipes. Low Carbon Steel Pipes are not as hard as hig carbon steel pipes,Though carburizing can increase its surface hardness...

Send Inquiry

Product Details

     ASTM A524 Carbon Seamless Steel Pipes


Brief Introduction

ASTM A524 Carbon Steel Seamless Pipes are Low Carbon Steel Pipes with max 0.21 % carbon content with combination of 0.90-1.35 % manganese. These Pipes are also known as mild steel pipes and tubes. ASTM A524 Pipes are low-cost Pipes easy to form and shape. These pipes are manufactured as per ASTM Specification and commercially referred as cs pipes or ms pipes. Low Carbon Steel Pipes are not as hard as hig carbon steel pipes,Though carburizing can increase its surface hardness.

 

ASTM A524.png



Specification

Standard

ASTM A524

Size Range

Outer Dimensions: 21.3mm – 610mm

Wall Thickness: 2.0mm – 59.54 mm

Length: max 16000mm

Certificate

The products are supplied with 3.1 specific test certificates, according to EN 10204. Certification according to 3.2 can be agreed at the time of ordering.

Surface Treatment

Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.

Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Packing

Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.


ASTM A524.png



Description

 ASTM A524.jpg

ASTM A524 Grade specification covers seamless carbon steel pipe intended primarily for service at atmospheric and lower temperatures. Pipe ordered to This specification shall be suitable both for welding, and for bending, -flanging, and similar forming operations. Recommended pipe size will be developed by FerroPipe upon receipt of your inquiry. A print or sketch of the part to be produced should be included. Grade, chemical analysis and surface condition are carefully considered, and production processes are tailored to achieve the best tubing for the end use.KRM STEEL is considered as the most Reliable ASTM A524 Pipes Manufacturer.


KRM STEEL stocks a complete range of IBR Certified ASTM A524 Carbon Steel Seamless Pipes in outer diameter tube sizes ½”-24” and Nominal bore NB sizes 15NB-600NB. Exporting Carbon Steel Pipes and Alloy Steel Pipes to countries worldwide including IRAN, IRAQ, KUWAIT, QATAR, South Africa, Nigeria, Saudi Arabia, Australia, Canada & Mexico.


Edit by Mr. Bruce Zhang of KRM/BSW

Contact us directly by:  

Email: bruce@kingruimansteelpipe.com  

Tel / Whatsapp: +86-18046588367

Skype: brucezhang166


Inquiry