Seamless Austenitic Stainless Steel Tube
Austenitic stainless steel has stable austenitic structure in normal temperature, it possesses very high corrosion resistance, good cold workability and good thoughness plastic, weldability and non-magnetic. Austenitic stainless steel is the stainless steel that has austenitic tissue at normal...Send InquiryChat Now
Austenitic stainless steel has stable austenitic structure in normal temperature, it possesses very high corrosion resistance, good cold workability and good thoughness plastic, weldability and non-magnetic.
ASTM A312, ASTM A269, ASTM A213,ASTM A376 ASTM A511 EN10216-5, ISO15156-3, ect.
OD: 1/2" to 24" ( 12.7mm--813mm)
Thickness: 10S to XXS (1mm--30mm)
PED, ASME, ISO9001:2008, ISO14001:2004
Physically speaking, stainless steel is a steel that is not easy to rust. In fact, a part of stainless steel is both stainless and acidic (corrosion resistant). Stainless steel corrosion resistance is due to the formation of chromium oxide film (passivation film) on the surface. This rust and corrosion resistance is relative. Experiment shows that the steel in the atmosphere, the weak medium such as water and nitric acid oxidation medium, its corrosion resistance with the increase of chromium content in steel, when the chromium content reaches a certain percentage of steel corrosion resistance mutation, that is, from easy to rust to not easy to rust, never corrosion resistant to corrosion. There are many ways to classify stainless steel. Classification of tissue structures at room temperature, with martensite, austenite, ferrite and duplex stainless steel.
Austenitic stainless steel is the stainless steel that has austenitic tissue at normal temperature. Almost has Cr 18%, Ni 8% ~ 25%, C about 0.1%. In addition to the corrosion of oxidative acid, such steel can resist the corrosion of sulfuric acid, phosphoric acid and formic acid, acetic acid and urea. If the carbon content is lower than 0.03% or has Ti and Ni, it can significantly improve the corrosion resistance of the steel. High - silicon austenitic stainless steel has good corrosion resistance to concentrated nitric acid.
Edit by Ms. Julia Zhu of KRM/BSW (Sales Dept.)
Contact us directly by:
Whatsapp / Skype / Cell: +86-18600036953