316L Stainless Steel Tube Heat Treatment

- Nov 10, 2017 -

Scope of application: pipe, heat exchanger, food industry, chemical industry, watch industry, etc.
Melting point: 1375 ~ 1450 c;
Solid solution treatment: 1010 ~ 1150 c.



316l stainless steel pipe


Working condition 
Annealing solid solution state: NO. 1, 2 B, N0.4, HL surface state, etc.
316L is molybdenum stainless steel, as a result of molybdenum in steel, stainless steel, the steel grade overall performance is better than 310 and 304, under the condition of high temperature when the concentration of sulfuric acid is less than 15% or higher than 85%, the 316L stainless steel pipe has a wide range of uses. 316l stainless steel also has good resistance to chloride erosion performance, so often used in the ocean environment.
316l stainless steel has the biggest carbon content 0.03, can be used for welding cannot undertake after annealing and maximum use of corrosion resistance.


Corrosion Resistance
Corrosion resistance is better than 304 stainless steel, in the process of pulp and paper production has good corrosion resistance performance. And 316L stainless steel resist ocean and the erosion of industrial atmosphere.


Heat Resistance
The intermittent use of under 1600 degrees and 700 degrees in the following, continuous use of 316L stainless steel has good oxidation resistance. In the range 800-1575 degrees inside, it is best not to continuous action 316l stainless steel. But outside the temperature range of continuous use 316L stainless steel, the stainless steel manufacturers has good heat resistance. The performance of the resistance of 316L stainless steel carbide precipitation is better than 316 stainless steel, can use the above temperature range.


Heat Treatment 
In 1010-1150 degrees of solid solution annealing temperature range, and then rapidly cooling. 316L stainless steel can't overheating treatment for hardening.


Welding
316L stainless steel has good welding performance. Can use all the standard welding method to weld. When welding according to usage, respectively using 316cb, 316L or 309cb filler rod or electrode of stainless steel welding. In order to obtain the best corrosion resistance, 316 stainless steel pipe welding section of annealing after welding is required to deal with. If you use 316l stainless steel, do not need to undertake annealing treatment after welding.


Edit by Ms. Julia Zhu of KRM/BSW (Sales Dept.)

Contact us directly by:  

E-mail: julia@kingruimansteelpipe.com

Whatsapp / Skype / Cell: +86-18600036953 




Related Products