ASTM A556 Superheater Steel Tube

ASTM A556 Superheater Steel Tube

ASTM A556 / A556M – 96(2012) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes ASTM A556 Superheater Steel Tube + ASTM A 556 ]M - 88 / ASME 556 /ASTMA556M-88/ASME556 Stainless Steel Square Tubes Square TubesStainless Steel Rectangular Tubes Rectangular Tubesinner packing Oval pipesStock room Storehouse...

Send Inquiry

Product Details

ASTM A556 Superheater Steel Tube


Brief Introduciton

ASTM A556 / A556M – 96(2012) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

ASTM A556 Superheater Steel Tube

ASTM A 556 M - 88 / ASME 556 /ASTMA556M-88/ASME556

Stainless Steel Square Tubes Square TubesStainless Steel Rectangular Tubes Rectangular Tubesinner packing Oval pipesStock room Storehouse


ASTM A556.jpg


ASTM A556 is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

 

Specification

Standard

ASTM A556, ASME SA556

Steel Grade

SA556Gr.B2, SA556Gr.C2

Size Range

Outer Dimensions: 12mm – 40mm

Wall Thickness: 1mm – 5mm

Length: max 16000mm

Certificate

The products are supplied with 3.1 specific test certificates, according to EN 10204. Certification according to 3.2 can be agreed at the time of ordering.

Surface Treatment

Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.

Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.

Packing

Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.

 

ASTM A556-1.jpg


Description


1.1 This specification2 covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the form of U-tubes, if specified, for use in tubular feedwater heaters.

1.2 The tubing sizes covered shall be 5/8 to 11/4-in. [15.9 to 31.8-mm] outside diameter, inclusive, with minimum wall thicknesses equal to or greater than 0.045 in. [1.1 mm].

1.3 Optional supplementary requirements are provided, and when desired, shall be stated in the order.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Method: Cold Drawn

Delivery Condition: NBK, Bright, U bending.

 

K%(`H9F]GGFT2NCE4$1Y(WH.pngU5B58E9~OMTCH2X}73MRJKN.png 



Edit by Mr. Bruce Zhang of KRM/BSW

Contact us directly by:  

Email: bruce@kingruimansteelpipe.com  

Tel / Whatsapp: +86-18046588367

Skype: brucezhang166



Inquiry